Square(-ish) Version of the Balustrade Coffee Table

I loved the RH-inspired Balustrade Coffee Table that I built for my parents, I decided to make one for our living room! Ours had to be more of a square though, to fit our space more appropriately, so I modified the dimensions. This affected our shopping and cut lists, of course. Check out the blog post for more info.

Built from Plan(s)
Estimated Cost
$200.00
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Sand top and bottom shelf with belt sander to make the surface level and flat. Then sand with a palm sander with 150- then 220-grit sandpaper. Wipe dust and debris clean with damp rag. Stain with Minwax Weathered Oak, let dry overnight, then stain with Minwax Special Walnut. Let dry. Finish with three coats of Minwax Wipe-On Poly, sanding with 400-grit in between coats.
Recommended Skill Level
Beginner