Submitted by brianl on Mon, 04/29/2013 - 22:17

I loved this plan. Could not find anything else close. There is details on pocket screws from another user. I loved this. I did use plywood but edge the front and rear with a 1x2 (planed thickness to be flush with plywood). I also pocket screwed the 1x2 to the plywood. I loved this and it is way cleaner than exposed corner moulding.

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Type of Wood
Maple & Maple plywood.
Finish Used
General Finishes - Pre-condition, stained and 4 coats of poly!
Recommended Skill Level



Wed, 05/22/2013 - 06:45

do you remember what color and brand of stain you used and what type of paint for the lettering?