Triple bunk bed

Submitted by Anonymous (not verified) on Sun, 09/18/2016 - 09:01

Thank you for sharing the plans for this. I really liked how out breaks down into 8 pieces to move. I felt the plans were lacking a bit of detail, I ended up downloading the sketch up app for $10. That app helped a ton! Due to lack of detail and not thinking ahead I ended up putting a couple bolt holes in bad spots and had to wood fill and move them. I also didn't understand what mirror image of left and right side were. Lol. I laid down the left side and carefully assembled, then I made the right side to look exactly like it. Lifted the left side, looks beautiful, lifted the right side and looks like a million screws. Lol. I also had to add additional wood to make it work since I essentially built the side inside out. I think I put the slats in a little closer then the plans suggested, I ended up cutting a few more if you notice the gap in bottom bunk slats. I also purchased "backpack strap" from ace hardware and laid it across the slats. I screwed the end slats and stapled the middle ones to the strap. All in all, a great project and it will last for years. Thanks for sharing. Built from

Built from Plan(s)
Estimated Cost
$275 for wood and bolts.
Estimated Time Investment
Week Long Project (20 Hours or More)
Type of Wood
Cheap pine, lot of sanding
Finish Used
I built this for a friend who wanted it delivered with unfinished wood, I would have used either, varnish or high goods paint for the kids bed.
Recommended Skill Level