Triple pedestal formal dining room table

Submitted by indi82 on Tue, 11/26/2013 - 07:16

This beautiful table measures a little over 8ft x 3ft and made out of oak plywood and pine.
Instead of using individual slats for the main surface as in the building plans, I decided on one large 8ft x 3ft piece of oak plywood. I encased it in 2 inch pine and routed the top edge with a 1/4" round over bit.

Built from Plan(s)
Estimated Cost
$150.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Pre-stain conditioner (1 coat)
Oil-based Minwax Red Mahogany stain (3 coats)
Oil-based Minwax Helmsman Spar Urethane (2 coats)
Recommended Skill Level
Intermediate