Tryde end table

Submitted by mdbennes on Mon, 04/13/2015 - 10:37

I built this table in about 3 hours with 5 2x4s yellow pine for the total cost of around $17 total...thats not including the kreg jig screws or stain.  I deviated from the original plans for the top to try something different with the 45 degree mitre cuts.  It came out great but I had to review a youtube video on making the kreg pilot holes at the 45 degree angles to attach the corners together.  I then cut the (4) 2x4s to fill out the top and used kreg jig screws to attach.  Very nice instructions by Ana and after posting to my FACEBOOK page, I'm getting orders!  :)  

Estimated Cost
18-20
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax Early American stain...then Minwax Polyurethane 3 coats.
Recommended Skill Level
Beginner