Work bench with wheels

Built this over a week because the table top needed to dry and harden. I decided to paint the whole thing to make it look decent. I Kreg jigged four 2x6's together and added wood hardener to the table top. It was pretty weak because the wood was still wet so I had to dry it out for a few days. I also filled in the gaps with wood filler and then used a belt sander to smooth everything out. Everything else were just 2x4's. I knew it would be heavy so I added wheels to move it around and as a final touch I am adding 90 degree iron accent brackets to the table corners but I haven't got those delivered yet. I also added rubber screw-in feet so that the bottom doesn't chip when you move it around. Got those from Home Depot for $3

Built from Plan(s)
Estimated Cost
$100 for wood and paint and sandpaper
Estimated Time Investment
Week Long Project (20 Hours or More)
Type of Wood
Pine
Finish Used
Kona stain, Golden pecan stain, polyurethane
Recommended Skill Level
Beginner

Comments