Submitted by MichaelDH on Fri, 08/14/2020 - 14:25

This is my second yard wagon, a little bigger and cleaner looking than the original. Made from 2x3 lumber for the frame and hitch, 1/2” OSB for the floor area, and various 1x lumber for the rest.

Because I detest seeing screw heads in anything I build, the side boards are assembled with plenty of 1.25” brad nails and Titebond glue. It is thoroughly sealed with Thompson’s before being assembled. You could paint or finish this anyway you want.

The rear railing lifts out to help you in emptying it.
The tires were bought at Menards for about $15 each.

Estimated Cost
$100
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Thompson water seal
Recommended Skill Level
Beginner