Community Brag Posts

New dining room with a board and batten, farmhouse table and six parson chairs.
Thanks Ana!

I remodeled the main floor bathroom for my parents. My mom had seen a vanity she like at a home center. Then she thought about doing an open vanity. Then I showed her the one Ana did for the Momplex (48" Turned Leg Vanity). and she loved it. This is what we came up with.

It has bead board panels on the ends and the doors. V-grove planks for the bottom shelf.

The top is made from 100 year old ship lap siding from my brother house. The sink is hand hammered copper with a venetian bronze faucet.

I built this console from the Grandy Sliding Door Console. I modified the plan slightly and lowered it to about 30 inches high, and have since hung the TV on the wall. I made the sliding door hardware at a local metal fabrication shop, and used patio door wheels for the hardware. It is stained with Rustoleum Dark Walnut stain wiped on with a cloth to ensure a non-uniform stain for a distressed look. I used the Kreg jig for most of the connections, and added support of the mid shelf in the back of the piece.

A media cabinet made from Curly Maple. Used biscuit joints for the corners, and face-frame for the fronts. Sliding glass doors riding on fiber glass rods. And glass shelves too (except on in the middle)

We have not added the final details but the chairs are already getting regular use. They are very sturdy so the girls use them for climbing as much as they do for sitting. I was a little worried that my chairs would not sit correctly but following Ana's "trick" for leveling them out worked like a charm. Now we just have to find the time to make two more so the girls will have room to accommodate friends when they visit... but there is that long list of other projects on my "to do" list... Thanks Ana! we are growing more confident every day! ;-)

Put together this rustic x table in about a week of spare time. I finished using Ana's espresso finish tutorial with the red elm gel stain but it was too red after three coats. I bought some regular black stain and put two coats of that on the project and it turned out great.

My wife wanted to incorporate some turquoise into the project. I did not. :-)

We compromised with the turquoise x's. I think the colors go well together.

I spent about $50 on wood and $40 on new stain, spray poly and paint. But that stain and paint will last the next 3-4 projects. So I'd say the total cost for this actual project was around $70.

This was my first ever project I put together. Now I have a list of about 8 things I'll be building in the next few months.

This bed came out beautiful! Thank you for the plans. 

This was our first attempt at making furniture and even though the difficulty rating was ‘intermediate’, the detailed instructions made the process less complicated. Our version of Anna White Essential Entryway Bench turned out better than we expected! Once it was built, I stained it grey, painted it white, then distressed it to make it look antique. I added a custom made foam cushion to the top and, voila!

TammyA

Loved this project. I bought a jig saw, and I had so much fun. I bought the black and decker one it was around $25.00 and works great for small projects like this one. Another birthday present for a beautiful girl who is turning 5 and I know there is always space for a step stool in the house with young ones. Hope she likes it. Thank You Ana I have been having so much fun!!

About six months ago I got my first router. I tore up a few boards with it experimenting but mainly used it for basic round-overs. I wanted to learn more so at Christmas Santa brought me the router table. My first real project was to build a project that would be a learning experience as well as produce something useful so I chose the Drill Bit Cabinet. You can see the plans at

http://ct-web2.unh.edu/lee/drill-bit-cabinet.pdf

This project requires cutting rabbet and dado joints. Basic joints but also requiring accurate cutting. There are no nails or screws holding the box together. I countersunk screws into the shelves for stability. The final result is what you see in the pictures. I learned a lot. A great starter project for novice router users. I took two days to complete the project but a knowledgeable worker could do it in a day.

I also deviated from the plans somewhat out of a desire to make the build easier and less expensive:

1. The plans called for cutting boards from a 1x8 but I chose to stay with the full size 1x8s I had in the garage. So the final dimensions became: Height 19-1/2 inches, Width 10-1/8 inch (closed or 20-1/2 inches open), and Depth 3-1/2 inches (open or 7-inches closed).

2. I could only find 30 inch and 12 inch piano hinges so I went with the 12 inch. Works fine. I must say I really need practice installing hinges. Took me two tries to get this one right.

3. The instructions call for cutting the box in half with a table saw but I don't own a table saw. So I cut the box in two pieces using a straight bit on the router table advancing about 1/8 inch at a time until I was within about a 1/16 inch from breaking through. I used a regular saw to finish the job and the sander to remove the little bit that was left. Worked fine.

4. The plans call for screws to act as the pivot for the two tiltable bit carriers. Instead I just inserted 1/4" dowel. Works fine.

Had a blast building this for my mother. Only problem now is everyone in my family wants one!

Fire truck bed by Ben

This was my very first furniture-building project. I was pleasantly surprised with how it turned out! It's definitely not perfect, but with some practice I plan to try bigger projects! It was a little more expensive than I would have liked because I had to buy a pocket hole kit that was $40, but hopefully I will be able to use the kit for future projects.

I followed the plans exactly except I used 4X4's for the "footboard' legs. I added molding to all the feet. I also added screw in fence top posts to the footboard legs. I had a small blemish I wanted to hide on the headboard, so I added wooden appliques to cover the mark.

To make the bed easy to move and store, I bought bed rail fasteners from this site http://www.wwhardware.com/wood-technology-bed-fittings-wt8056.

Great, matching bedside tables and headboard.  Made it mostly from pine, and scrap lumber.

*I did not have any plans to work from*
the cost really depends on how much you can get your wood for. I had a lot left over from previous projects, so $500 is only a low guess.

This is the second of 3 poker tables built.
Each side is 24"
the table measures 58" across
Some of the accompanying photos of the build were from my first table, but thought they might help.

I purchased a foam pad and "speed cloth" from a local poker supply store. The slide away bev. holders are kept in place with rare earth magnets

If you need any specifics, I'll try to help

We built this command center to hang in our kitchen so that we can organize incoming papers and jot notes on the chalkboard portion. Also a hook for keys!