Community Brag Posts

Ana's Flip Top Storage Bench. I made this ASAP, after I saw it in the book, and then online. I thought it was going to be longer and was thinking it would go great in the mudroom, but after it was finished it turned out to be the perfect size for a fireside seat.

This is my first time using hinges....are they supposed to show? By the time I got them on and working I was pooped and didn't want to test my luck. Maybe I'll have to get some more decorative looking ones!

Used my Kreg Jig, still had splitting issues.
Used finishing nails around the shelves to secure a bit.

Oh and HD didn't have a 1x12x12 so I had to get three 1x12x6 . Bet that cost more, but I'm happy to have some more scrap wood to play around with.

Thanks Ana!

This cabinet is made of our local Torrey Pine: “the rarest pine species in the United States, an endangered species growing only in San Diego County and on one of the Channel Islands”-Wikipedia. It has special meaning to us because we love hiking at the Torrey Pine State Reserve! And the purple one is poplar, which I used on the sides.

The design is inspired by early American jelly cupboards and shaker cabinets. We wanted an open cabinet with shelves so we can see and appreciate those pretty bowls and potteries we love. We also love the charming country style of those primitive furniture pieces.

The entire post is here- http://www.apieceofrainbow.com/diy-make-a-wall-cabinet-from-scratch/

This Farmhouse table and bench were made, stained, and painted over the course of two weekends. This makes a great project for a beginner woodworker to cut their teeth on.  You can make something fantastic while learning various woodworking techniques (i.e. joinery, planing, sanding, and staining). The chairs were purchased separately at the At Home store for $150 each. 

I used scrape wood for the headboard to save money. Wood cost approx $15, paint from oops section $3 and screws from my Kreg jig box set.

This was my first real project and I'm hooked.

Thanks Ana!

My first DIY project that I built as a wedding present for my soon to be wife. Got my inspiration from Ana White's husky farmhouse table. I made the table a 4'x4' top and a counter height 36".

My husband and his father-in-law made this bed together for our daughter. It took about 3 months working every other weekend. My father-in-law is an engineer and he modified the bed so we could more easily assemble and disassemble it to get it up the stairs and into her room. My mother in law painted it, added the flowers and made the roof shingles out of craft foam sheets.

This was a pretty straightforward project. The building itself was simple and quick, although the sanding and paint took a while. I wish I had sanded before putting the boards together to make a cleaner look. The bolts had to be awkwardly close to the edge to avoid the 2x6s on the headboard and footboard, but it ended up working ok with some serious pre-drilling. I used 9 1x3 slats to create the platform for each mattress (18 total). It would probably be better with 12 so they are closer together. 

Overall, the bunk bed is super sturdy (and heavy!) and the kids LOVE it. 

Fun project. I built for my newest grandson Rowan. I used Rockler hinges which keep the top open at any angle and got the cushion custom built on Amazon for $30.00. Nice accent to the nursery. Raised initial and teddy bear also from Amazon

We wanted something by the back door for our jackets and hats'n' mittens. This came out better than we thought!

I changed the height of this king size bed and upgraded the boards underneath to 2X3 since I'm a big ole boy and I wanted this to last for years. - Don White

Really happy with the final product and the hubby is glad I have finally finished a project. This project was an answer to the piles of washing crowding our small laundry. I found 3 sturdy family sized (huge) rectangular laundry baskets for $10ea at Kmart and then used Sketchup to adjust the plans to allow for the bigger baskets (Sketchup is so much fun to use). I ended up having to buy an extra piece of wood for the top because I forgot to allow for the thickness of the sides when measuring the top and base. (I know, I know, measure twice cut once...) I used the piece I had cut for the top as the base and then got a new piece for the top. When I finally got all the pieces cut to size it all went together pretty quickly. I used melamine for the box because it was cheap and I wouldn't have to paint it. It did chip a little bit along the edges when I cut it but it's not too bad. I used 30 x 30mm pine for the basket supports and had to countersink the screws 1cm so I could use 30mm screws. I used iron-on melamine edging to finish the exposed edges of chipboard and used paint on the back and supports. Actual construction didn't take long but the painting took about a day by the time I'd done one basecoat and two top-coats.

This was my very first build by myself (besides cedar plank planters). I made this for my boyfriends daughter so she could have her own personalized chair to sit by the fire pit. I actually used the plans from Ana's Handbuilt Home book.

We didn't paint it, but I think it turned out well. We followed the plan almost exactly and it came out great!