Community Brag Posts

Step 1

Getcha a FREE PIANO and some help to move that heavy sucker!  You can find these pretty easy on Craigslist.

Step 2

Get a hammer, pry bar and a sawzall and start taking this piano apart.  Make sure to wear safety glasses and gloves because those strings will pop you good if you're not careful.

Step 3

Sand down the pieces you are going to use.  If the piano has laminate on it leave it if at all possible.  If it's already curling up then you're going to want to invest in a power hand planer.

Step 4

Assemble the studio station according to your equipment you'll be using.

Step 5

Stain, Paint or just poleyurathane to your liking.

Step 6

Make some music!  You can buy my album on Itunes or wherever you download your music.  FYI!  There are 2 Jonesey's.  One uses profanity.  This is NOT me.  None of my music will ever have profanity in it.

Jonesey-My Favorite Day-EP https://itunes.apple.com/us/album/my-favorite-day-ep/id1087791540 

I changed the height of this king size bed and upgraded the boards underneath to 2X3 since I'm a big ole boy and I wanted this to last for years. - Don White

Really happy with the final product and the hubby is glad I have finally finished a project. This project was an answer to the piles of washing crowding our small laundry. I found 3 sturdy family sized (huge) rectangular laundry baskets for $10ea at Kmart and then used Sketchup to adjust the plans to allow for the bigger baskets (Sketchup is so much fun to use). I ended up having to buy an extra piece of wood for the top because I forgot to allow for the thickness of the sides when measuring the top and base. (I know, I know, measure twice cut once...) I used the piece I had cut for the top as the base and then got a new piece for the top. When I finally got all the pieces cut to size it all went together pretty quickly. I used melamine for the box because it was cheap and I wouldn't have to paint it. It did chip a little bit along the edges when I cut it but it's not too bad. I used 30 x 30mm pine for the basket supports and had to countersink the screws 1cm so I could use 30mm screws. I used iron-on melamine edging to finish the exposed edges of chipboard and used paint on the back and supports. Actual construction didn't take long but the painting took about a day by the time I'd done one basecoat and two top-coats.

This was my very first build by myself (besides cedar plank planters). I made this for my boyfriends daughter so she could have her own personalized chair to sit by the fire pit. I actually used the plans from Ana's Handbuilt Home book.

We didn't paint it, but I think it turned out well. We followed the plan almost exactly and it came out great!

I love all the free plans. I built this one last year based off one of the plans. Edited to add space length and width, with an end for taller cans. by Chasity Abbott on Facebook

I built this for my grandson for his 2nd birthday to go along with the new race car bed that he got.  I left off the pump handle and hose as a safety precaution since he is only 2 and a handful.  This was definitely the gift that everyone was talking about!  I love your plans Ana...keep 'em coming!!!

Took me a week to build but not bad for a one-legged man and no help. Instead of shingles I opted for corrugated pvc. Setting up shelves inside and going to build a bin for scrap lumber with scraps in the corner. I think I made some cutting errors on the doors there is a 1" gap between them. I put white marble stone down to keep it from setting directly on the dirt. - Edd

My very first build inspired by the Ana-White.com website. I would declare this as a success. Decided to make two laundry drawers and keep the bottom open for extra supplies. Perfect for our household.

This creation was made using scrap wood, hooks I got from Bunnings and some blackboard paint. Apparently now Brodie doesn't know where the keys are. This was based on Ana White's Craftsman Frame Plan.

I am not sure what happened first time I posted this as it was posted as Guest (sorry). Anyway....

When my daughter was born I promised that I would make her a dollhouse. A few weeks ago I found these plans, and absolutely loved the visual layout of the rooms. I stuck with this layout and tweeked the dimensions according to what worked best for the space it would proudly sit in. It is 46 inches high and 31 inches wide at the walls, and is made from 12 inch wide MDF which I primed with a latex primer and then finished off with a semi-gloss white on the majority of the walls. I also mixed the colors for the roof and also the 3 accent walls to give it an extra wee shot of color. 
I was very, very happy with the end result, and having caught what I now know as the "dollhouse bug" I thought "what about if I added a chimney ?". So I added it. I then though what about adding a roof ridge and gable to the roof. The house looked even better. Progressing onto full-blown "dollhouse-flu",  I then decided to make a chair for what would later be the living room. That was it, fully addicted now I couldn't stop and found myself obsessively planning, designing, messing up, re-designing, cutting, building and painting until I reached the point where last night I attended my first "DA" meeting. 
I found Dollhouse Annonymous very helpful and although not cured, I realise that it is perfectly acceptable for a 44 year old Scotsman to build a dollhouse for the daughter (naughty 2 1/2 year old daughter) that is the love of his life. If she is happy when she unwraps it on Christmas morning, then all of the work shall be worth it. 
This site is top of my bookmark list and I love it. !

I adjusted the dimensions to fit my space and added a shelf on the bottom. I built it using my Kreg Jig.

I love this bin so much I built a large one and a small one. The small one is for the bathroom. The large on is for the kitchen. This is actually a rather easy build. I used mdf. I grooved the front panel on the large bin to add character. This was built from Ana White's Wood Tilt Out Trash or Recycling Cabinet Plan.

Made for my grand daughter.  It was too cold in the shop to use carpenters glue, so I used medium thick, gap filling CA (cyanoacrylate)glue, and brad nails instead of screws.

For the 7 years I have been married to my lovely wife we have used an old 70's bedside table and some Rubbermaid boxes as our nightstands. It was time to give my wife a nightstand that she would love. With the help of the Kreg Jig, a new table saw and some trials and tribulations in staining, I have given her a special treat. Best part: She loves them!