Castle Bed - Twin Size

| Print this plan

Castle bed for twin size mattress

Castle bed to fit a twin mattress. This was made for some friends and it had to fit a space 60 inches wide hence the narrow turrets. You could easily widen those though to suit your requirements.

Full plans available at

If you have any questions you can email me at


Shopping List

Full shopping list include in the downloadable plan.

Common Materials
Cut List

Full cutting list in downloadable plan

Cutting Instructions

Full cutting list in downloadable plan

Tape Measure
Speed Square
Safety Glasses
Kreg Jig
Circular Saw
Miter Saw
Drill Bit Set
Shelf Pin Jig
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Finish Used
The one in image was finished in a Sherwin Williams bespoke Pink color and was spray painted.