Farmhouse Bed Canopy Modification (All Bed Sizes)

Submitted by Ana White on Thu, 01/10/2019 - 09:00
Difficulty
Intermediate
| Print this plan

It's simple to add a canopy to our Farmhouse Bed plans. The solid wood beams are perfect for adding a touch of luxury to a bedroom space. 

This plan is built on top of our Twin Farmhouse Bed, Full Farmhouse Bed, Queen Farmhouse Bed, King Farmhouse Bed or California King Farmhouse Bed.

Collections
farmhouse bed with canopy added to the top
Dimensions
dimensions diagram for farmhouse bed with canopy
83" Tall, Width/Height depends on Bed Size

Preparation

Shopping List
  • 2 – 4×4 Posts, 8′ Length 
  • 4 – 2×4 Boards (stud or 8′ length) 
  • 4 – Hanger Bolts, at least 5″ Long (see below) 
  • 4 – Angle Brackets (see below) 
  • 8 – 3″ wood screws Flat headed wood screws for the brackets, at least 1 1/2″ long 
  • wood glue 
 
Common Materials
120 grit sandpaper
primer
wood conditioner
paint
paint brush
Cut List

Measure your Headboard and Footboard heights.  Find the difference between the two heights (should be about 37-1/2")

  • Canopy Post, Headboard – 2 – 4×4 Posts @ 24″ 
  • Canopy Post, Footboard – 2 -4×4 Posts @ 24" + difference between height of headboard and footboard (should be about 57-1/2" cut)
Cutting Instructions

Post heights are shown to work with Farmhouse Beds from Ana-White.com. Canopy top boards need to be cut to the width of the bed/length of the bed. Please see instruction steps for more information.

Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Kreg Jig
Drill
Circular Saw
General Instructions

Cut all your pieces, as described below. You will need 2 headboard posts, 2 footboard posts, 2 canopy sides and 2 canopy ends.

Instructions

Step 1

Canopy Sides are equal to the distance between the legs on the sides, as shown in the diagram above.

Step 2

Canopy Top and Bottom are equal to the 2×4 header in the headboard and footboard as shown in the diagram above.

Step 3

You will need 4 brackets like these (the L30 – should be less than 1 dollar each) http://www.strongtie.com/products/connectors/L-LS-GA.asp These are available at most hardware stores. Just remember, the bracket needs to be less than 3 1/2″ wide and less than 1 1/2″ high, like the L30 bracket from Simpson Strong

Step 4

You will also need 4 Hanger Bolts, like these

Step 5

Step 6

Drill holes in the Canopy Posts. The holes will be in the center of the bottom of the posts. Drill the hole to the depth and width of your hanger bolts, wood screw end. Screw the hanger bolt into the canopy post, using glue to hold in place.

Step 7

Screw the posts into the headboard and footboard holes. Tighten until snug, but do not break the glue hold in the posts. Adjust the posts so that they line up with the legs. This is shown above.

Step 8

Screw the canopy top ends in place, as shown above. Use at least 3″ screws. I recommend predrilling the screw holes first before attempting assembly.

Step 9

Screw the Brackets to the Canopy Sides. The diagram shown above details how to screw the brackets to the remaining canopy top sides. Predrill your screw holes before fastening. Use a flat headed screws.

Step 10

Attach the Canopy Top Sides. Predrill your holes first. Rest the Canopy top sides on the Canopy Ends with the bracket. Screw in place, as shown above. There should be no visible screw holes. Sand and finish as desired. You may wish to finish the canopy unassembled, then bring it into your bedroom and assemble the prefinished pieces. I am not making any guarantee of the structure or safety of this plan. Use at your own risk.

Comments

Don Gulley (not verified)

Sun, 01/10/2010 - 18:05

Ana,

Thanks so much, my wife is going to love this. I'm going to begin this project very soon and i can't wait. Thanks again for doing this.

Don

bagfashionista (not verified)

Mon, 01/11/2010 - 06:43

thank you!! this was one of the items i was hoping you'll include plans for!! maybe we'll be able to upgrade from sleeping on a mattress on a floor to an actual bed!!

bagfashionista (not verified)

Mon, 01/11/2010 - 07:03

ana - quick question --- i love the finish of the bed in the dark wood (2nd picture)...how would you recommend getting that look? A black stain? or just spray paint it black?

thanks so much!

Stephanie

SaraReno (not verified)

Mon, 01/11/2010 - 09:47

This is exactly what I was looking for! I'd printed up the Farmhouse plans so I can build this for the guest room but I was still thinking it needed a canopy. THANK YOU!

seletikoka (not verified)

Mon, 01/11/2010 - 11:19

I just came across your website from U creat and I love it!! Quick question on the bed if I were to paint it what type of wood would you use and if I were to stain it what wood would you recommend I use?

Thanks for your posting your awesome creations!!

Ana White (not verified)

Mon, 01/11/2010 - 12:57

WOOD

I just used lumber for this project. To me, anything that says Farmhouse needs to be rustic and thick, and regular old lumber is the definition of Farmhouse Style. I've also used lumber for a stain grade Farmhouse bed, and the results were equally fantastic.

Also, the boards I have listed for you to use are lumber boards. This is also the cheapest method.

Jayne-at-the-e… (not verified)

Tue, 01/19/2010 - 11:36

This is a gorgeous design and one I really want to make! I LOVE anything rustic country!!! But I was wondering if you have simple plans for the chest at the end of the bed in the first photo I have always wanted one, but could never justify the price tag. Thank you so much for your website, I *love* it!

Lindsay Cesari (not verified)

Fri, 02/26/2010 - 05:30

As someone else mentioned above, I'd LOVE plans for that chest at the foot of the bed. :)

Jessica P (not verified)

Fri, 01/21/2011 - 21:49

My husband doesn't know it yet be we are about to make this bed for our preteen who just upgraded to a full size mattress set. I have her new mattress set on a simple metal frame while I researched the type of bed that I wanted to get her and this is perfect! I will definately add pictures of the outcome once finished!