1. Home
  2. Plan Catalog

Hailey Platform Bed Frame

|save this plan
Submitted by Ana White on Mon, 08/19/2019 - 18:21
Difficulty
Beginner
| Print this plan

Build your own bed frame!  This platform style bed frame is easy to build with off the shelf lumber and basic construction.  Stain or paint to match your style or decor.  Our free plans include step by step diagrams, shopping lists and cut list.

Related: Pair with our matching headboard plans.

Collections
Hailey Storage Bedroom Collection
modern kids platform bed wood farmhouse style
wood platform bed frame diy
 
 
 
 
This bed was designed and built in partnership with my friend Whitney at Shanty2Chic. Please take a second to stop over and visit Whitney at Shanty2Chic for lots more details and photos on this bed.
 
 
Dimensions
wood platform diy bed frame
This bed is for full size mattresses. To convert to twin, subtract 15" from width. To convert to queen, add 6" to width AND 5" to length. This assumes bed sizes of TWIN: 39" x 75" FULL: 54" x 75" QUEEN: 60" x 80"

Preparation

Shopping List
  • 4 – 2x6 @ 8 feet long or stud length
  • 2 – 2x2 @ 8 feet long
  • 1 – 2x4 @ 10 feet long
  • 1 – 1x2 @ 8 feet long
  • 3 – 1x3 @ 8 feet long
  • Additional 1x3 boards, bed slat system or box spring
  • 2 ½” pocket hole screws or wood screws
  • 2” finish nails
  • 2” wood screws for screwing down slats if using
Cut List
  • 2 – 2x6 @ 75”
  • 2 – 2x6 @ 57”
  • 2 – 2x2 @ 75”
  • 1 – 2x4 @ 75”
  • 2 – 1x3 @ 79”
  • 1 – 1x2 @ 54”
  • 1 – 1x3 @ 54”
  • 4 – 2x4 @ 7”
  • 28 – 1x3 @ 27" OR Box spring measuring 54” x 75” max overall - slats are cut in half to maximize materials of an 8' long board
Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Drill
Circular Saw
Power Sander
Drill Bit Set
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

Build the 2x6 frame as shown above.

Step 2

Attach cleats to inside for supporting slats. Use 2" screws and glue.

Step 3

This middle support is important for full size or larger beds. Attach so top is level with top of cleats.

Step 4

Now we can start trim out. Add trim so it's flush on insides and at head of bed.

NOTE: Kreg Jig users make frame first, and then attach complete frame to bed.

Step 5

Step 6

You can taper the legs, or even use store bought tulip feet for a fancier foot. Attach to base of bed.

Step 7

Now add the slats. Slat placement and number of slats is dependent of your mattress requirements.

Step 8

If you find your bed needs a little extra support in the center, here's the best way to beef it up.

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.

Project Type
Beds and Bed Frames
Full
Room
Teens
Bedroom
Style
Children's and Kid's Room Furniture and Toy Plans
Farmhouse Furniture
Rustic Furniture Plans

Comments

Brad L.

Tue, 07/16/2013 - 18:54

I'm considering doing this for my 1st project from this site. I haven't really seen anybody use red cedar to build with. Would that be a decent wood to choose?

toya0908

Mon, 08/19/2013 - 10:52

there is one on here that is for a twin platform bed and I made it for my son and it is with real wood and very sturdy and he loves it. Today I am building this full size one I hope you do it

toya0908

Mon, 08/19/2013 - 10:53

there is one on here that is for a twin platform bed and I made it for my son and it is with real wood and very sturdy and he loves it. Today I am building this full size one I hope you do it

edgarIII

Wed, 10/23/2013 - 15:51

This may be dumb as I am just a beginner, but does anyone know what kind of wood and stain is used in the actual picture? I love that look. Thanks!

Livelife7

Sun, 12/29/2013 - 11:39

I am in love with this bed frame! Being new to building, is there any way I can get the dimensions for building this bed as a standard King sized bed for the base and headboard?

ibthemom

Tue, 02/11/2014 - 11:45

How would I adjust the height for this bed? I want to use it with a box spring and mattress

ibthemom

Tue, 02/11/2014 - 11:45

How would I adjust the height for this bed? I want to use it with a box spring and mattress

calexander0814

Tue, 04/01/2014 - 18:19

If I was to use a box spring with my mattress would I leave out the slats and just use the edging or just adjust the depth of the edging, slats, and middle support with legs? Also, would you change the feet for the bed too?

I really like this bed and would like to tackle this bed for my sons first big boy bed, which I think he will love moving into.

Any advise would be great.

skyzen

Wed, 04/30/2014 - 12:16

I have a small room and a 6 inch mattress to put on it. Can i make it using 1x6 boards instead of 2x6s? I am thinking of using 2x4 as center support and then putting a plywood on top.