This is only my second SketchUp creation. I have uploaded this model to the 3D Warehouse my user name is SketchyBuilders so you can search for the model with my user name as well.
I saw this bed on another site... http://woodgears.ca/bed/bunk_bed/tractor.html. I did revise it to fit a standard crib mattress.
I've not yet gone to the construction phase but I plan to.... Very basic construction of 2x4's, 2x6's and 1x4's and your Kreg Jig!
The tractor headlights are just those inexpensive tap lights for fun...
11 - 2x4x8
4 - 2x6x8
4 - 2x2x8
12 - 1x4x8
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.