This easy to build modern farm table plan will add that touch of rustic modern to your contemporary space. Plans also available for matching modern farm bench and square modern farm table. By Ana-White.com Reader submitted photos.
6 - 2x6 boards (make sure these boards are VERY straight) (about $2.50 each)
5 - 2x2 board (under tabletop supports) (about $1 each)
2 - 2x4 boards (about $1 each)
2 1/2" wood self tapping screws
Sandpaper, ranging from coarse to fine
Stain or Paint of choice
A) 4 - 2x6 cut at 30" (Legs)
B) 2 - 2x2 cut at 33" (Inside End Supports)
C) 2 - 2x4 @ 63" (Side Apron)
D) 2 - 2x4 @ 25" (End Apron)
E) 7 - 2x2 cut at 33" (Under tabletop supports)
F) 6 - 2x6 cut at 63" (Tabletop pieces)
It is very important that you measure the width of your boards and make sure they are 5 1/2" wide (tabletop boards) otherwise, your aprons could be short or long. See the Square Modern Farm Table Plans for a tutorial on how to build the tabletop first with pocket hole screws, and then attach the legs and aprons. That way you can adjust your aprons as necessary.
Measure down 1 1/2" down from the top of the side apron, and mark all the way down the length of the apron. This will be the top side of the tabletop support pieces, E. Then mark every 6" and place a board E, keeping the top edge 1 1/2" below the top of the table, as shown above. Do not worry about the last support piece not being exactly 6" from the end - this does not matter. Make sure your project is square.
We apologize if there was an error in this plan. Please help us out and report any errors here.