Nightstand with a Charging Notch

Submitted by Georgia M on Tue, 03/31/2015 - 15:47
Difficulty
Beginner
| Print this plan

This nightstand has a notch in a the drawer that you can pull a cord through for easy tabletop charging! Plus the notch doubles as drawer pull (no knobs needed!) to keep it looking sleek and simple. Get the plans at More Like Home: http://www.morelikehome.net/2015/03/nightstands-day-4-built-in-charging…

This nightstand has a notch in a the drawer that you can pull a cord through for easy tabletop charging! Plus the notch doubles as drawer pull (no knobs needed!) to keep it looking sleek and simple.

Get the plans at More Like Home: http://www.morelikehome.net/2015/03/nightstands-day-4-built-in-charging…

Dimensions
22 1/2" tall x 18 3/4" wide x 14" deep
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Project Type
Room