Portable Workbench Feature from The Rogue Engineer

Submitted by Ana White on Sat, 12/20/2014 - 09:59
Difficulty
Intermediate
| Print this plan

Portable workbench with lots of storage feature from The Rogue Engineer

I can't tell you how many times I've looked at this project table and thought .... I should simplify the design and make a garage work table like it.

Enough times where I actually went to the sketch board and drew one out -

So you would just make two quick bookshelves out of 1x12s, then attach together with 2x4s, adn throw a plywood top and caster wheels on.  You'd probably need a little framing between the 2x4s too.  

And then my friend The Rogue Engineer posted this plan -

That pretty much rocked!  The paper roll, the adjustable shelves, the center divider for support.  @Jamison ... can I humbly mutter "great minds think alike?" 

So go check these plans out from The Rogue Engineer.  Jamison does an outstanding job creating plans that just gotta be shared!

Have a great one!

Ana

 

CLICK HERE FOR PLANS

 

 

Finishing Instructions
Preparation Instructions

Comments

RogueEngineer

Sun, 12/21/2014 - 09:18

Thanks for the feature Ana! And I can't tell you how many times I've thought of a design only to find out you've already got it covered on your site! Haha, great minds really do think alike.