Sawhorse Leg Plywood Table Featuring The Merry Thought

Difficulty
Starter Projects
| Print this plan

DIY Sawhorse Leg Plywood Table by The Merry Thought

Figuring out extra seating for holiday meals or large family gatherings can always be a little challenging to say the least. That's why when I saw this beautiful tablescape complete with DIY instructions for the table itself, it's nothing short of brilliant and the answer we've all been waiting for. "We" as in the few and the brave to "host" these gatherings!

Set up and take down, repeat for the next gathering, it's that simple!

Have fun with this one and amaze your friends with your enginuity, stop over at The Merry Thought for this and more!

 

General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.