Free porch swing plans by ANA-WHITE.com
5 - 2x4 @ 8 feet long
2 - 1x6 @ 8 feet long
1 - 1x6 @ 4 feet long
1 - 1x4 @ 8 feet long
Pocket holes are not necessary for this plan, but if you do have a Kreg Jig, you'll want to use the 2 1/2" exterior pocket hole screws. 2 1/2" exterior self-tapping screws for building the frame (unless you assemble with pocket holes) 1 1/2" exterior self tapping screws for attaching seat and back slats Hardware for hanging
2 - 2x4 @ 48"
4 - 2x4 @ 18"
4 - 2x4 @ 19 3/4"
1 - 2x4 @ 48"
2 - 2x4 @ 11 1/4"
2 - 2x4 @ 22 1/2"
5 - 1x6 @ 48"
2 - 1x4 @ 48"
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
For more details on hanging the swing - please visit Shanty2Chic here.
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
We apologize if there was an error in this plan. Please help us out and report any errors here.