![](/sites/default/files/3154805952_1330326323.jpg)
This was our first woodworking project. I was not that hard to put together.
I made a couple of changes to the design. I used 4x4 for the legs. I also change up the board that were used ontop. I have a step by step on my blog.
The almost the same as the table. Check out the changes and the cut list here: http://www.domesticated-engineer.com/1/post/2012/05/bench-for-farmhouse…
![](/sites/default/files/3154810789_1330326323.jpg)
![](/sites/default/files/3154810788_1330326323.jpg)
Built from Plan(s)
Estimated Cost
$200
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
#41 Walnut Wood Stain
Satinthane Polyurethane
Satinthane Polyurethane
Recommended Skill Level
Beginner
Comments
Guest (not verified)
Tue, 02/28/2012 - 05:13
Can you post a link to your
Can you post a link to your blog with the instructions? Did you make your table a little shorter than the original plans?
sbowes1
Tue, 02/28/2012 - 08:43
7 foot table
Yes, the table is a little shorter. I made mine 7 feet long to fit our space. The blog link is http://www.domesticated-engineer.com/1/post/2012/02/farmhouse-table-par…
Thanks!