This projected turned out great! I admit, it was a bit of a stretch for me. This was the first project where I had to use the Kreg jig. Yikes! That takes some time getting used to! I chose to stain my Kennell/End Table with Minwax Red Elm. And that took the longest! Everyone always makes it look easy to stain something, I still haven't gotten the complete hang of it after project 50, and the waiting between coats is for the birds. But, I am happy with the overall end product! Thanks Mrs. Ana White!
Estimated Cost
I used premium wood, so about $125
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Red Elm, two really thick coats!
Recommended Skill Level
Intermediate
Comments
YankeeBelle
Wed, 07/17/2013 - 17:26
LOVE IT!!
It looks so professional and so much nicer than the fatally versions! Great job!! BTW what plan did you use?
Lilo7
Thu, 07/18/2013 - 08:48
Thanks!
Hi YankeeBelle,
I used the plans for the "Large Wood Pet Kennel End Table." If you chose to do this project, beware that the cut sheet does not include all of the plywood cuts. There should be two identical for the sides, and one additional one for the back.
Thanks again!