When I saw Ana's plans I had to make this table for my home. I like the rustic look, and so I distressed the wood using a steel wool and vinegar solution. I modified the top by using four 2x8's and one 2x10. Otherwise everything is the same. It turned out great and everyone who has seen it at my home loves it.
Built from Plan(s)
Estimated Cost
$130
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Brushed one coat of steel wool and vinegar. Then brushed on 2 coats of Minwax semi-gloss. Next, I sanded using 400 grit. After sanding, I wiped on a very thin 3rd coat of poly using a clean rag.
Recommended Skill Level
Beginner
Comments
Pam the Goatherd
Wed, 10/16/2013 - 19:14
Looks good!
Looks good!
In reply to Looks good! by Pam the Goatherd
petesveen
Thu, 10/17/2013 - 10:55
Thanks!
Thanks Pam!
Nathan1342
Wed, 10/23/2013 - 10:08
I like the steel wool and
I like the steel wool and vinegar finish, give it a nice weathered look!
Kabarie
Mon, 11/04/2013 - 14:00
Love it!
The finish you chose just sold this table to me. Love it love it! Great job!
petesveen
Sun, 04/06/2014 - 14:41
Thanks!
Thanks Kabarie and Nathan!
beccalc1981
Fri, 09/05/2014 - 05:55
Steel question
So very very new to all this wood working but very excited to get started! I LOVE the finished look of this table. I had never heard of steel wool and vinegar, but just googled and can't to try it! Thanks!
beccalc1981
Fri, 09/05/2014 - 05:56
Not really a question after I
Not really a question after I googled for details on the mixture. So just a fan comment :)
charchav
Wed, 11/25/2015 - 07:14
QUESTION
I Love this Table . You should just come to our house and make it for us.LOL
I was just wondering what type of wood did you use? We live in the south east and cant find any Douglas Fir wood. what other wood would you suggest?
thanks Char
Misha1dibbs
Tue, 08/09/2016 - 07:12
Very nice!
The table looks fantastic. I know you built this two years ago. How has the top of the table held up? I am currently working on this table, and I am debating weather or not to use the kreg pocket screws or to use 7/16ths dowels for the body and mortise and tenon joints for the breadboards. However, that is more work than the kreg screws. If the kregs hold up well, than I would rather do that. Anyway, the table looks fantastic.