2 Rustic X consoles with drawers and one with an extra shelf

The one with the extra shelf is 3" taller than the one in the plan and I also took 3 inches from the bottom shelf as well as lowered it. The X's for the taller one were very challenging but turned out pretty good and I chose to use wood guides underneath instead of purchasing metal ones. the drawer fronts are 1x12's and sides are 1x8's. I used my router to cut a grove to hold the plywood bottom and added a support in the center. I have a dovetail joiner but haven't learned how to use it (hopefully will learn soon).
Overall I am very pleased with the way these turned out. I plan on making some with single drawers with the left over wood!
Thanks Ana I couldn't have done any of this had it not been for your site!!!

Built from Plan(s)
Estimated Cost
$120.00 each
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
pine
Recommended Skill Level
Beginner

Comments

Free Plans Made Possible By Our Sponsors