Modified to a 3 ft square table from this plan!

Submitted by herzo1852 on Wed, 07/31/2013 - 10:13

I am currently making the matching 2 seater Loveseat (making 2 of them) so I wanted a square table to go in the middle of the 2 sofas to make it look nice, so the rectangular table was not quite what I needed.

I used 2x3's for the legs and adjusted the side measurements of the square table for the extra width.

I didn't want to paint it, so this is Rustoleum Kona stain with polyurethane (clear semi gloss) over the top to protect it from the rain - which you can see was exactly the kind of weather I had about 10 minutes after it was put outside!

Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Untreated pine.
Finish Used
Rustoleum "Kona" stain (from Lowes), and a clear Minwax polyurethan in semi gloss - applied the stain with a foam brush and the clear polyurethane with a good quality brush (less hairs fall off the quality brushes!).
Recommended Skill Level