Rustic Entryway Table

Submitted by LN2014 on Mon, 03/14/2016 - 22:54

Made from Canadian white pine just made from 2x6s that where ripped down to the top,legs, sides and the X's. Sanded 3/4in plywood was used for both shelves instead of solid 1x12 pine board to cut down on cost of the build. 15in wide x 4ft long x 30in high

Estimated Cost
$50
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Varathane Ash Stain
Varathane Polyurethane Satin
Recommended Skill Level
Intermediate

Comments