Rustic Nursery

Submitted by Anonymous (not verified) on Mon, 08/15/2016 - 01:59

I built this crib and changing table using the DIYstinctly made crib plans and the simple changing table plans from this site.  The tartan design on the shelving is the product of LOTS of painters tape.  A word of warning: if you decide to build this crib, buy your matress first and cut the rails to length.  I had to remedy a gap of about 6 inches at the end.

Estimated Cost
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Provincial: 2 coats
Polyurethane: 2 coats
Recommended Skill Level