Rustic Table

Submitted by SusieK on Sun, 04/06/2014 - 10:16

This Rustic Table was built by my just-turned-15-year-old, Joey. He is amazing!

Joey is a Kreg Jig pro (and an engineering marvel) and this table is rock solid. The only change he made was the direction of the table legs (per my request) and he tapered the legs as well.

I finished the table using Ana's directions: http://ana-white.com/2013/05/staining-and-finishing-tabletops As a stain and poly novice, these directions were a life saver!!

Learning lesson: When I applied the stain (in several coats to match my cabinetry), I was nervous and patient. Then, I built up my confidence and decided to apply a very thick coat of stain. Don't do that; it was a sticky mess! I searched online and lots of people said that I would have to start over. Don't do that, either. One person (thanks to him!) said to be patient and wait it out. Fwew! So, I moved it onto the screened porch (and turned on the overhead fans) each day so that the warm Florida air could help dry it out (alternatively I imagine you could leave it in the house with some fans blowing across it). It took about a week of waiting (ugh), but it dried (yay!) so that I could apply the Spar Urethane.

Must do: Ana suggests using Minwax® Water Based Helmsman® Spar Urethane for a top that will tolerate water condensation, milk spills, etc. I did this and have no worries that my son's project will be ruined. This table is going to last!

The bench was also an Ana design. It was a really quick project.

Thanks so much to Ana for having these accessible, free plans. I could never have afforded a table of this substance and we are SO proud to tell visitors about Joey's Table when they ask.

Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Clear pine from a "big box" store.
Finish Used
Minwax Water-Based Wood Conditioner, Minwax Wood Finish Cherry 235, Helmsman Spar Urethan Clear Semi-Gloss
Recommended Skill Level
Beginner

Comments

Free Plans Made Possible By Our Sponsors