Tryde Console Table

Submitted by metsfan94 on Sat, 03/17/2012 - 14:18

Untreated 4x4s are so hard to find around me so I used 2x4s for the legs. To get the legs truly square, I used my table saw to rip about a 1/4" off from each side of 2x4s (making the legs 3" by 3"). This also helped the legs appear to be one solid piece. After sanding with palm sander I applied Dark Walnut Minwax Stain. After the first coat set, I applied more stain to random places on the table to give it a somewhat "worn" look I guess. I finished with two generous coats of Minwax Semi-gloss poly. I like the way it came out. I also built the tryde coffee table, and after doing so I realized that the 2x6 breadboards had a slight angle to them. To fix this on the console table I attached the breadboards more inward toward the center of the table. The level look is just more appealing to me, but it's no biggie. Now I'm working on finish two tryde end tables, and soon I'll be starting a tv stand. Love the plans and the site in general! Thanks!

Built from Plan(s)
Estimated Cost
About $25-30
Estimated Time Investment
Afternoon Project (3-6 Hours)
Type of Wood
Mostly white pine. I think the 1x2 and 1x4 were fir.
Finish Used
Stain: Minwax Dark Walnut
Clear Coat: Minwax Semi-gloss Poly
Recommended Skill Level
Beginner

Free Plans Made Possible By Our Sponsors