American Girl or 18" Doll Kitchen Stove Range or Oven Gray with Brass Hardware

Submitted by Ana White on Wed, 01/27/2016 - 11:23
Difficulty
Beginner
| Print this plan

Make your own wood doll kitchen!  Free plans for American Girl or 18 Inch Doll sized kitchen stove oven or range plans made from wood.

Hi everyone!  So glad to see a few of you have built American Girl or 18" doll houses this year! 

I promised you when I shared the smaller dollhouse plans with you last Holiday season that I'd get the furniture plans to you too.

Here's what we got so far -

The Amercian girl or 18" doll sized sofa and chair plans are here.

And then for the kitchen, the Farmhouse Style sink plans are here.

And today, got you covered with the oven or range!

 

This little oven or range has a real working door!  It just pivots on two very carefully placed screws, so no need to buy specialty hinges!  I'm loving the combo of dark gray and brass right now, and it's especially cute on this doll sized kitchen.  Darling!

I'll get you the fridge plans soon too!  

The oven plans follow (if this is the homepage you'll need to click READ MORE below).  Enjoy, and have a great day!

Ana

 

 

 

Dimensions
Suitable for American girl or 18" dolls

Preparation

Shopping List

3 feet of 1x6 board 6 inches of 1x2 board scrap plywood 7-1/4" x 8-1/4" knobs and handle

Common Materials
1 1/4 inch finish nails
Cut List

2 - 1x6 @ 7-1/2" (sides) 1 - 1x6 @ 5-3/4" (bottom) 1 - 1x2 @ 5-3/4" (front apron) 2 - 1x6 @ 7-1/4" (top) 1 - 1/4" plywood @ 8-1/4" x 7-1/4" 1 - 1x6 @ 5" (door)

Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Circular Saw
Brad Nailer

Instructions

Step 1

Nail the bottom to the sides. You can use the 1x2 aprons as a spacer to help support the open end as you attach. Use glue with all nails.

Step 2

Then attach apron at top.

Step 3

Attach top to apron and sides. TIP: If you are adding knobs to front you may wish to do this now, before the back is attached.

Step 4

Attach back. If you have shorter nails like 3/4" length you can use those instead.

Step 5

Step 6

I spray painted knobs and handles and attached to the front of the project..

Comments