Following numerous requests, here are plans for the Hyde Side Table. This plan matches the plans for the Tryde Coffee Table and the Tryde Console Table. Made of solid wood in a rustic planked design, you will be shocked at just how beautiful 2x4s can be. This sturdy easy to build end table will add character and a natural aspect to your living space. Also can be used as a nightstand. Features sturdy solid wood legs and a large top with breadboard ends.
1 – 4×4 Post, 8 feet long 1 – 1×4, 8 feet long 2 – 2×4, stud length or 8 feet long
A) 4 – 4×4 Posts @ 22 1/2” (Legs) B) 4 – 1×4 @ 2 1/4″ (Spacers) C) 2 – 1×4 @ 16 1/2″ (Top Leg Supports) D) 4 – 1×4 @ 12″ (Apron) E) 2 – 2×4 @ 21″ (Breadboard Ends) F) 6 – 2×4 @ 14″ (Tabletop Pieces)
Cut all your boards, except you may wish to cut the tabletop boards after taking an exact measurment of your table in step 7. Make sure you get nice straight cuts. Either use a miter saw, chop saw, or mark your boards with a square and cut with a handheld saw. Predrill all of your screw holes with a countersink bit. Before attaching any boards, mark where the attaching board will fit. Always use glue. Use 2 1/2″ screws unless otherwise directed. Take a square of the project after each step (see HOW-TO section). Work on a clean level surface.
We apologize if there was an error in this plan. Please help us out and report any errors here.