Hailey Platform Bed and headboard +5" in height

Submitted by Debi G on Sun, 07/14/2013 - 08:07

I used the Hailey plans with the following modifications because there's no such thing as TOO sturdy.

Instead of 2x4s on their own, I used the leftover lengths of my 2x6s for legs, joined at the corners (Kreg pocket hole screws) with 2x4s for a chunkier look and a very stable bed.

I made the legs 5" taller than the plans called for. Otherwise, the bed simply seemed like it would be too squat for my tall son.

For the casing/trim, which is pricey, I went to the Habitat Re-Store and found two matching pieces for $3.00 a piece.

I deviated from the plan by adding the trim last, after the headboard was otherwise complete. I had considered painting the casement, but decided to leave it all wood-tone, and I'm glad that I did.

The furring strips at my local big blue box store were so terribly warped that I used pine boards instead. This increased the overall price, but decreased frustration and time spent sanding. I work slowly and deliberately as it is, always worried about mis-measuring, so anything I build takes twice as long as anticipated.

With every project I undertake, my wood filler shows and my budget exceeds the amounts in plans and other brag posts. The bed and headboard combined cost me about $230 to build. That's still a great budget, but $80 more than I'd hoped after reading Shanty 2 Chic's inspiring details.

The stain on this bed is Minwax Provincial 211, and I used three coats of Minwax's water-based poly.

Best of all, my husband and I carried this bed from the garage, up the stairs, around the corner, and into a bedroom while it was fully assembled with legs. (He lost the bet on that one, saying I'd regret wood-gluing it all together ahead of time.)

Estimated Cost
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Provincial 211
Recommended Skill Level



Mon, 07/15/2013 - 12:16

Looks really good. Been thinking about doing a heavily modified version of the Hailey bed for my son as well. Could you do me a favor and tell me the measurement from the floor to the bottom of the frame rail?