Coastal Kentwood Bed

This bed was built based on the Kentwood bed plans. The are a few adjustments to the size, and slats were used instead of the vertical trim pieces. The 54 slats were cut from 2- 50 count bundles of 48" lath boards. The side rails were re-purposed from an old King size waterbed.

Built from Plan(s)
Estimated Cost
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
DIY Chalk paint using Behr's Silver Polish. Finished with a clear wax.
Recommended Skill Level



Tue, 01/19/2016 - 05:21

This bed looks terrific! Love the overlapping slats and the coastal vibe.