Christmas Tree Shelf

Submitted by Ana White on Sat, 11/16/2019 - 09:18
Difficulty
Intermediate
| Print this plan

Free build plans for this wood Christmas Tree Shelf.

Decorate and display with a Christmas Tree Shelf!  Perfect for Advent Calendar, displaying Christmas Cards, or hanging stockings. Our tree shelf features four shelves and hooks.  Built by Jaime Costiglio, free step by step plans from Ana-White.com

Christmas Tree Shelf
christmas tree shelf
christmas tree shelf
christmas tree shelf
christmas tree shelf

Christmas Tree Shelf Features

  • Under $10 to build (for 1x3s)
  • Easy to build with basic building tools
  • Four shelves perfect for advent calendar, Holiday cards, or displaying ornaments
  • Hooks at bottom for hanging stockings, or extra coats from Holiday visitors
  • Easy 1x4 construction
  • Easy to hang
  • Solid wood - so accepts stain beautifully
  • Perfectly sized to fit most any home
  • Use this tree shelf as a Christmas tree for smaller homes, apartments and lofts or even dorm rooms!  Just fill with greenery and ornaments.

We love it for displaying and hanging stockings.

It's just 1x4 boards, stacked to create a tree shelf.  You could fill with decor, as Jaime has done, or with Christmas cards, or candles, or family photos.  How about using as and advent calendar shelf, and hanging stockings off the hooks?  So many ways!

But here's the catch - Christmas is right around the corner.  So you've gotta make this project now to enjoy it this year!

More Photos and Build Steps

This Christmas tree shelf was built by Jaime Costiglio for our Handbuilt Holiday series.  For more construction photos and details, please hop over and read Jaime's build post.

CLICK HERE TO READ THAT'S MY LETTER'S BUILD POST
 

Christmas Tree Shelf Video Tutorial

I had to get in on the fun too!  In this video, I show you how to build the Christmas tree shelf.

This is a very FUN build and a very FUNCTIONAL project.  I promise, you are going to love it!

And if you just can't get this project built for this year, make sure you pin for next year!

Can I Make it Bigger?

Yes!  Here's what to do:

  1. Hold off on cutting the base part where the hooks are, and don't assemble anything, just cut and layout.
  2. Working from the top down, keep adding more sides, and then measuring how long the next lower longer shelf needs to be and cutting it.  Repeat for as many shelves as you'd like.
  3. 1x boards can't span more than about 3 feet without starting to sag, so keep that in mind.  You can strengthen up the 1x boards by gluing and nailing 1/4" plywood to the back sections.
  4. Once you have all your shelves cut, figure the size of the trunk and cut.
  5. Then start assembling, working from the trunk upward, just nailing and gluing.
Dimensions
christmas tree shelf dimensions
Dimensions for Christmas Tree Shelf shown in diagram

Preparation

Shopping List
  • 12 feet of 1x4 or 1x3 boards (I used 1x3s in the video, Jaime used 1x4s)
  • 1/4" plywood 6" x 15" or larger (for just one portion, will need more plywood for covering multiple portions)
  • 1-1/4"and 3/4" brad nails
  • 3 hooks
  • Hanging kit or screws for hanging to studs in wall
Cut List
You can directly substitute 1x3s for 1x4s in the below cut list
TRUNK
  • 1 - 1x4  @ 16-1/4" 
  • 2 - 1x4 @ 3-1/2" or 1x3 @ 2-1/2"
MAIN TREE - SAW BEVEL IS 25 DEGREES
  • 1 - 1x4 @ 18-3/4" longest point to longest point both ends cut at 25 degrees bevel
  • 6 - 1x4 @ 7-1/2" long point to short point, both ends cut at 25 degrees bevel
  • 1 - 1x4 @ 15-1/8" longest point to longest point both ends cut at 25 degrees bevel
  • 1 - 1x4 @ 11-3/8" longest point to longest point both ends cut at 25 degrees bevel
TREETOP - CHANGE SAW BEVEL TO 30 DEGREES
  • 1 - 1x4 @ 7-3/4" long point to long point, both ends cut at 30 degrees bevel
  • 1 - 1x4 @ 8-5/8" long point to long point, both ends cut at 30 degrees bevel
  • 1 - 1x4 @ 9-1/2" long point to long point, both ends cut at 30 degrees bevel
  • Scrap 1/4" plywood for filling in second shelf approximately 6" x 15"
Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Circular Saw
Miter Saw
Brad Nailer
Power Sander
General Instructions

Use proper safety and read all power tool manuals and follow safety guidelines while using power tools.

Instructions

Step 1

Use a jigsaw to cut out the side support pieces in a decorative shape before cutting - once you cut into the small piece, it's hard to clamp down and make the decorative cuts.  Attach to back piece.  You can use 1-1/4" nails and glue or screws to attach.

Step 2

Use 1-1/4" brad nails and glue to attach bottom shelf to supports and back.  

Step 3

Use 1-1/4" brad nails and glue to attach a pair of sides to the bottom shelf.

Step 4

Continue working upward, attaching the shelves and sides, with 1-1/4" brad nails and glue.

Step 5

First, attach the bottom board to the rest of the project as you did all other shelves.

Then attach the sides to the bottom board to complete the tree.

Use 1-1/4" brad nails and glue.

Step 6

Trace out the second to top shelf on to 1/4" thick plywood.  Cut out with circular saw.  Glue and nail in place with 3/4" brad nails.

Step 7

Attach project to wall, preferably through bottom and back plywood pieces.

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.

Comments

buckey91

Wed, 11/25/2015 - 11:02

This is so beautiful, and great for someone without a mantel! I'm terrible with angles, would anyone know if I would have to change the angles if I made it larger?