6 Piece Shelving Unit

Submitted by Jay Pepper on Tue, 02/21/2017 - 05:30

Made this unit in 6 sections

(2) End Units = 15" x 14.25" x 83"

(2) Middle Units = 27" x 14.25" x 68"

(1) Middle Unit = 15" x 14.25" x 68

(1) Top Unit = 69" x 14.25" x 15"

Total for the whole unit = 99" x 14.25" x 83"

I used my Kreg jig (K4) for pretty much the whole project.  Made all the shelves adjustable also using the Kreg Shelf Pin Jig.  Glad I purchased the pin jig because it made the whole project go easier. 

What I did different be from the plans shown:

1.  The shelves:  I used the 1x12 and did add the 1x2 but just made the front go down instead of out to give it a bulkier look. 

2.  The top: I basically mirrored the bottom shelf that way it would be a flush look.

 

 

Built from Plan(s)
Estimated Cost
~$275.00 (including Paint, lumber, screws and sandpaper)
Estimated Time Investment
Week Long Project (20 Hours or More)
Type of Wood
Pine for my wood. Cost was low but boy did I have to sort to find good boards.
Finish Used
Paint
Recommended Skill Level
Beginner

Free Plans Made Possible By Our Sponsors