72 inch vanity

Submitted by Anonymous (not verified) on Thu, 03/21/2019 - 19:25

We needed an inexpensive alternative for our master bathroom remodel. After looking at Ana-White.com, I decided I should build a vanity myself. 

I had been gifted some newel posts, which I thought would work great for legs. The aprons and shelf slats were made with "choice" pine that I purchased from a big box store. I had two drawers leftover from a piece of furniture that was repurposed and I added new fronts from a piece of wood left from that same piece of furniture. I also had some leftover 1/4 inch plywood that I used to partition the drawers. 

The overall length once the counter is installed will be 72 1/2 inches by 23 inches wide. Because we are using vessel sinks (sitting on the countertop) I choose to make the base of the vanity 32 inches high. 

 

Estimated Cost
Under $100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Wood stain, custom color.
3 coats of poly acrylic in matte
Recommended Skill Level
Intermediate