Chest of Drawers

Wanted a chest of drawers with Deep Drawers.  As the drawers were so deep I used some scraps to fit supports to the undersides of the drawers as shown in one of the photos.  I knew the drawers would be stuffed to the brim and would need to be quite strong.  On the bottom two drawers I fitted three supports from scrap 1 by 4 and 1 by 6. 

On this piece I didn't bother covering up all the internal pocket holes like I normally would either and it looks a bit of an ugly duckling on inside but once top is on and drawers are in you cannot see anything.

I thought the natural colored backing gave it some interest too.

Happy to share my plan with anybody who wants it.