Farm Table for Birthday

Submitted by Docmike on Sun, 06/23/2019 - 20:15

This table was for my wife's birthday present.  I followed/modified the simple and pocket hole farmhouse table plans.  The table top is 1x12 pine as I couldn't find any cedar that wasn't cupped or warped after several weeks looking and wanted a wider board top.  Then we used the easiest padded bench plans, adding height as suggested to the legs and using 3 cedar 1x6's for seats.  All tops were sanded and sealed before 4 coats of marine spar poly were used.  

Thanks for the plans, Ana.  

Estimated Cost
$300 - $400
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Pro Polyurethane Spar Varnish
Recommended Skill Level