King Storage bed

Submitted by Anonymous (not verified) on Sun, 12/27/2015 - 18:50

Variation using your King Bed Storage plans. Made from pine plywood and solid pine for the trim. Drawers made from aspen with pine fronts and 1/4 inch pine plywood. Took about 60 hours in my garage. Two large drawers (with bottom sliders) and 4 jewellery trays on the end piece. 2 smaller drawers (Custom fit without sliders) plus an open bin space on each side piece. Contrasting teak wood jewellery trays pop out with magnetic push catches. All joinery is with hand cut dovetails. Total of 144 dovetails.

Estimated Cost
$300
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Pecan stain with 3 coats of polyurithane
Recommended Skill Level
Intermediate

Comments