Providence Bench

Submitted by Megan11213 on Mon, 07/08/2013 - 08:09

Providence Bench made from pine 2x4's and countersunk deck screws. I do not have a Kreg Jig so I used metal fasteners on the two cross-braces. I left off the diagonal supports because my drill would not fit once I had the cross-braces in place. Starter project for me. Good practice and fun to build! Finished with Minwax Dark Walnut and sprayed with Minwax clear matte sealer.

Built from Plan(s)
Estimated Cost
$25
Estimated Time Investment
Afternoon Project (3-6 Hours)
Type of Wood
Pine 2x4s.
Finish Used
Minwax Dark Walnut. Minwax spray clear sealer, matte.
Recommended Skill Level
Starter Project