Submitted by Anonymous (not verified) on Tue, 12/13/2016 - 07:17

I was excited to make these for my 2 nieces.  It was new for me to cut at degree angles but it came together well.  I did them over time but I'd estimate about 2.5 hours for each scooter (I'm a newbie). I ended up putting a 5th wheel in the front to stabilize it more.  Since it's a gift I thought better to be on the safe side.  Casters were much cheaper on amazon than at Home Depot.  

Thanks for the plans Ana! 

Estimated Cost
mostly scrap on hand. with casters and paint $20
Estimated Time Investment
Afternoon Project (3-6 Hours)
Type of Wood
plywood
Recommended Skill Level
Beginner