Scroll Legged Console made by RW Creations

Submitted by Anonymous (not verified) on Wed, 03/02/2016 - 12:01

I found these amazing plans from Ana's website here.  Couldn't be easier!  I modified mine a bit to fit the space and used recycled pine wood for my project!  The Scroll legs I used my jig saw to cut them out with the great stencil provided in these plans.  I was really happy with the result, as I only had minor sanding to do to make them match up when I glued them together.  Since I was painting this piece I used dry wall mud over the seams on the legs to hide the joints (a lot less expensive than wood filler).  Since it was all recycled wood I had to do a lot of sanding but it saved me a lot of money!  So very happy with this project!  Thanks for again for the amazing plans!!!


Randi Wolf

RW Creations

Estimated Cost
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Finish Used
I stained the piece with a dark walnut stain. I then painted it a Chalked Ivory. Sanded the edges to bring the dark weathered look through and then sealed it with Varathane Triple thick polyurethane.
Recommended Skill Level


Free Plans Made Possible By Our Sponsors