Build a run for your chicken coop! Free easy step by step tutorial from Ana-White.com

Preparation
4 – 2x6 @ 12 feet long
7 – 2x6 @ 8 feet long
9 – 2x4 @ 8 feet long
1 – 2x4 @ 10 feet long (cut three 35” door pieces from this board to conserve lumber)
1 – 100 foot roll 36” wide chicken wire
½” staples
2 exterior gate hinge sets
2 ½” PH screws
4 – 2x6 @ 12 feet long
13 – 2x4 @ 48” long
7 – 2x6 @ 8 feet long
DOORS
4 – 2x4 @ 35”
4 – 2x4 @ 47 ½”
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
Instructions
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Comments
Jodo4390
Sat, 09/10/2016 - 19:15
Interior?
Are there any pictures you could spare of the inside of your coop? I'm trying to decide where I want everything to go but thought you might have some insight ☺️
Zekouetteof69
Wed, 06/26/2019 - 00:25
Find someone
Bonjour Jean claude Saïgon.