DIY Industrial Cage Light Wall Hanger Featuring Fox Hollow Cottage

Difficulty
Beginner
| Print this plan

DIY Cage Light Hanger by Fox Hollow Cottage

Where industrial meets rustic! A perfect blend on this Cage Light Wall Hanger. 

Would't it be fun to paint the cage too! The best part about this? No hard wiring needed. This would be a fun focal point or upgrade of some simple light fixtures around the house or in the bedroom. What do you think? Check out the full tutorial over at Fox Hollow Cottage!

General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!