Dress Up Storage by Craftiness is not Optional

Submitted by Ana White on Thu, 12/05/2019 - 09:28
| Print this plan

Organize and store all the dresses!  This dress up storage project features a hanging closet rod and lots of storage for all the accessories and the shoes in the open base.  Designed and built by Craftiness is Not Optional, free detailed plans below.

dress up storage

Dress Up Storage Features

  • 3 foot long closet rod will hang many dress up outfits
  • Open base keeps everything contained - no matter how long the cape or fluffy the tutu
  • For shoes, purses and accessories, just toss in the open bottom
  • Add caster wheels for easy mobility
  • Paint or finish to match your room or style
  • We love it personalized 

dress up storage dimensions diagram
36" x 36" x 12"


Shopping List
  • 1 – 10 foot 1×12 board
  • 1 – 6 foot 1×10 board
  • 36″ long 1-1/4″ diameter dowel or wood closet rod
  • 2″ self tapping wood screws (about 20)
Common Materials
120 grit sandpaper
wood conditioner
paint brush
Cut List
  • 2 – 1×12 @ 36″ (Sides, round top corners 3″ down with a jigsaw)
  • 1 – 1×12 @ 34 1/2″ (Bottom)
  • 2 – 1×10 @ 34 1/2″ (Sides of Storage Box)
  • 1 – 1-1/4″ diameter dowel or closet rod @ 34 1/2″ (Closet rod)
Cutting Instructions

If you have a compound miter saw, make all cuts on it.  If not, use a circular saw with a guide.

Cut the corners with a jigsaw and sand the jigsaw cut smooth.

Tape Measure
Speed Square
Safety Glasses
Hearing Protection
Circular Saw
Power Sander
Drill Bit Set


Step 1

Storage Box

Predrill holes along the long edges of the bottom with a countersink bit. Then apply glue to the bottom edge of the storage box sides and screw the bottom to the storage box sides with 2″ screws and glue.

Step 2


Cut the arch shape from the sides as shown above. I’ve done this quite a bit, and it’s easier said than done to get two arches that match exactly with a jigsaw. What I do is create a pattern by folding a sheet of 12″ x 12″ scrapbooking paper in half and cutting out an arch shape. Then I trace this pattern on to the wood and carefully cut to the outside of the traced line with a jigsaw. Then I clamp the two boards together, and sand, sand sand with coarse sandpaper until the ends match. Another trick if you just can’t get the ends to match is to round the cut edges, so it’s not such a sharp line – then it’s more difficult for the human eye to see that the ends are not a perfect match.

Once you’ve cut the ends, predrill pilot holes along the bottom and side edges 10″ up (I center mine 3/8″ in) and screw the sides to the storage box. Oh, apply glue to the ends of the storage box first, and keep your outside edges flush.

Step 3

Closet Rod

Now there are several different ways you could attach the closet rod, but I liked the idea of actually gluing and screwing it in place because the top would then have some support to keep the sides in place. So measure down 3″ and to the center of your tops and predrill pilot holes. My trick . . . thread your screws through so the end is just barely showing through. Then line the screw tip showing through to the center of the dowel. Apply glue and screw it together. Do the same on the other side.

Step 4

And here is what we’ve got with 2″ caster wheels and 6″ letters. Is this just for princesses? Because I LOVE this, even for a big girl closet! Hmmmm . . . now you got me thinking.

Step 5


Alex (not verified)

Thu, 02/03/2011 - 05:40

This would be awesome to modify the scale and use for American Girl Doll accessories and clothes :)

Diane (not verified)

Tue, 02/15/2011 - 23:48

This is fabulous! I however have zero tools to create one myself. But I did send a link to this to my Uncle who has a wonderful wood shop. I'm really hoping he can create one for my two little princesses!
Thanks for sharing.

Kate (not verified)

Wed, 06/08/2011 - 07:19

I would pay someone to make this for me! I do not have the tools to do this but if someone sold these, they could most certainly make a profit!

eellsinoc (not verified)

Sun, 09/11/2011 - 16:14

My husband just finished my daughter's Dress Up Station today - she loves it....we are using some tote boxes on the top shelf for jewelry, hats, etc. We also added more hooks on the sides....thanks for the help!
Pinterest Project - Dress Up Station

Monica G (not verified)

Thu, 11/03/2011 - 07:33

I was looking for something just like this for my daughters dress up clothes. Thank you for posting this! Now all I have to do is follow the directions! I can't wait to see what it looks like.

R.S. (not verified)

Mon, 11/28/2011 - 08:29

I LOVE this! Can't wait to get it finished!!! I have five kids and space is limited. This is exactly what we need to get organized before Christmas! Thank you!

Guest (not verified)

Tue, 01/31/2012 - 17:16

My husband just built this!! Love it. I painted it, but how did you get the writing on front? The way i tried didnt work at al