Community Brag Posts

We made this for my husband's Granny who has a bright green thumb, campared to my slightly black one. It turned out great.

This is also the project I learned how to use a Kreg Jig. Amazing. My husband is hooked.

Built this over a week because the table top needed to dry and harden. I decided to paint the whole thing to make it look decent. I Kreg jigged four 2x6's together and added wood hardener to the table top. It was pretty weak because the wood was still wet so I had to dry it out for a few days. I also filled in the gaps with wood filler and then used a belt sander to smooth everything out. Everything else were just 2x4's. I knew it would be heavy so I added wheels to move it around and as a final touch I am adding 90 degree iron accent brackets to the table corners but I haven't got those delivered yet. I also added rubber screw-in feet so that the bottom doesn't chip when you move it around. Got those from Home Depot for $3

I wanted to try attempt the beam table and my son's wedding rehearsal dinner was the perfect reason. My wife liked the table so much, she asked me to make three more. Because they will be used in our new wedding venue business, I wanted them to to withstand the weather. The materials were quite a bit more expensive as I used 10 ft x 3 ft  x 2 3/8" thick redwood butcher block planks for the tops and cedar 4 x 4's for the bases. Stained and sealed with Cabot sealant. What do you think?

This is a modified plan for Ana White's Farm House Table.

I shortened the table to about 72 inches with breadboards on the ends and added removable breadboard extensions for a total of about 100 inches of table for a 12x11 room. I also built the Farm House bench but shortened it to 48 inches.

The wood is white pine and Douglas Fir 4x4 legs. The total cost was $198 for the wood/screws and about $30 for the stain and sand paper. I bought an additional set of countersink bits for holes.

I used the following tools:

• Hand Saw
• Table Saw
• Compound Miter Saw
• Hand Drill with various bits and countersinks
• Square, pencil and straight edges
• Tape measure
• Clamps
• Wood Chisel Set
• Sharpening Stone
• Level

• It took about 35 hours of work.

  The stain is English Chestnut and we pretreated the wood to accept the stain by using wood conditioner. This made a dramatic difference in leveling out the stain between the white pine and Douglas Fir. I used 3 coats of clear polyurethane and 2 coats of satin on the top with gentle sanding in between coats.

This was one of our early builds.  I"ve learned a new way to do doors since then so hope to replace these before we move.  I love all the storage on this unit!  The finish on the tops is a metallic glaze I made.

Our version of the outdoor sectional.  We couldn't find 24" wide pillows so we modified the design to accommodate 22"x24" ones.  We also added a 1x8 held on with pocket screws to provide some additional support on the back and help keep the pillows from falling through.

Easy project that has helped us stay more organized. We use Cozi to maintain the calendar, but this allows us to highlight things that the kiddos need to know during the week. We keep the chore schedule, laundry schedule, meal plan, and out of routine activities on the week calendar so the kids can tell what is going on at a glance. The allowance is also hanging up at the top as an incentive to get their respective jobs done for the week. I used galvanized sheet metal glued onto a 1/4 inch plywood base and coated it with whiteboard paint. This allows it to be magnetic and easily written on. Love the letter holder for homework and important paperwork.

Things we have used it for so far:
Activity schedule (swimming lessons, soccer practice, etc.)
Meal plan
Unusual activities (parties, movie night, etc.)
School stuff (project due, spirit week, etc.)
Chore schedule
Laundry Schedule
Room of the week: what part of the house gets a deep clean this week.
Servant of the week: which kid is the designated helper for non-chore activities when an extra hand is needed.

We are still figuring out all the ways to use this to good effect, but the kids really like being able to see what is coming up in the schedule for the week.

I needed a small nightstand and was able to build this with wood left over from the Farmhouse table project, it's not perfect but I love it.

I am very happy with how the finish in this turned out... the green gold paint and the American Cherry wood compliment each other well!  Doing this again on more proj

I added metal corners made by bending 1 1/4 x 1/8 inch flat bar and attached with 1/4 x 1 inch lag bolts 

Decided to build these as I could find anything tall enough to be bedside tables. Easy to follow plans that came together quickly. 

This feeder worked out great for Sammy, who is about 95#. He seems a lot more comfortable now (and has started using his water dish instead of the toilet! ;) I wanted a more rustic look but wanted the easy clean up of tile on top.

My wife and I need a big dresser for the new addition to our home.  So instead of a media console we turned this into a dresser.