Build a X desk with these free easy do it yourself plans! Features step by step instructions, detailed diagrams, cut list and shopping list.
6 - 1x3 @ 8 feet long - Shop around for 1x3s with very sharp, square edges
1 - 1x4 @ 12 feet long
1 - 3/4" plywood or other project panel 24" x 48" suitable for desktop use
1 - 1/4 sheet 1/4" plywood or hardboard
2 - 16" Euro style drawer slides (the cheap white ones that attach to the bottom corners of the drawers)
2 - 1x3 @ 35 3/4" - Both ends cut at 35 degrees off square, ends are parallel to each other
2 - 1x3 @ 31 3/8" - Both ends cut at 35 degrees off square, ends are parallel to each other
4 - 1x3 @ 17 1/2" - One end cut at 20 degrees off square, other end cut at 35 degrees off square, measurement is longest points - SEE IN STEP 1 AND 2
2 - 1x3 @ 14" - One end cut at 20 degrees off square, other end cut at 35 degrees off square, measurement is longest points - SEE IN STEP 4
2 - 1x3 @ 18 1/4" - One end cut at 20 degrees off square, other end cut at 35 degrees off square, measurement is longest points - SEE IN STEP 5
2 - 1x4 @ 24" - Both ends cut at 35 degrees off square
2 - 1x4 @ 45"
1 - 1x3 @ 45"
1 - 1/4 sheet plywood or other project panel 48" x 24"
4 - 1x3 @ 15 1/4"
2 - 1x3 @ 12"
1 - 1x3 @ 44"
1 - 1/4" plywood or hardboard @ 44" x 16"
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
It would be a good idea to lay out your legs first. A dry run will minimizes mistakes later.
Start with the two longest leg pieces. Notice you will need to build two leg sets that are mirrored. Attach the 17 1/2" long leg pieces to the bottoms with 1 1/4" finish nails and wood glue. Take great care to line edges up - you want to create the illusion of a solid wood leg here. This will save you sanding work later!
Attach drawer members to drawer bottom side corners. Attach cabinet members to insides of desk. Follow the instructions in this plan for installing drawers.
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.