1. Home
  2. Plan Catalog

Laundry Basket Dresser

|save this plan
Submitted by Ana White on Mon, 11/15/2010 - 22:12
Difficulty
Beginner
| Print this plan

The Laundry Basket Dresser has taken my laundry room from the messiest room in my home to the tidiest. It's so easy to pull laundry out and put it directly into baskets. I then can take each basket to it's respective room and fold and put laundry away. For any busy home, these are a must.

laundry-basket-dresser-2

This really wasn't my idea.  I have some smart sisters.  They looked at the piles of laundry in my tiny laundry room, and said, Ana, what if . . .

All your laundry baskets could be like drawers in a dresser . . .

And we didn't have to see your dirty - and clean - laundry every time we visit.

In my defense, most of the piles of laundry in my home are clean.  They just rarely make it to the dresser.

But this is one dresser that I can work with.

I can deal with stacks of laundry with this system!  Do you have a laundry problem?

That's your sticker.  For each of these laundry basket dressers, you will need three of these baskets.  Way up here in Alaska, each basket was $3.50.  Should be less for you.

PS - If you are interested in a slightly different size/configuration, check out these plans as well!

Dimensions
Dimensions are shown above.

Preparation

Shopping List

3/4″ Plywood cut into 15 1/2″ wide x 8 feet long strips (referred to as 1x16s)
1/4″ Plywood for the backs
1 1/2″ x 1 1/2″ metal angle (ask for it at Blue or Orange)
2″ wood screws or 1 1/4″ pocket hole screws
3/4″ wood screws (to screw the metal angle to the insides of the boxes)
1 1/4″ wood screws
wood glue
wood filler
finishing supplies

Cut List

2 – 1×16 @ 35 1/4″ (Sides)
1 – 1×16 @ 24 1/2″ (Bottom)
1 – 1×16 @ 26″ (Top)
1 – 1/4″ Plywood @ 36″ x 25 3/4″ (Back)
6 – 1 1/2″ x 1 1/2″ Metal Angle 15 1/2″ long (ask hardware store to cut or cut with a hack saw)

Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Drill
Circular Saw
Power Sander
Level
Drill Bit Set

Instructions

Step 1

Build the Box

I used pocket holes, but you can also use 2″ wood screws countersunk and screwed together to build the box.

NOTE: Top Measurement should be 26″

Step 2

Back

Adjust for square then screw the back on with 1 1/4″ screws and glue. I finished mine at this stage by filling all holes with wood filler, all plywood edges, and any imperfections in the plywood. I then sanded with coarse sandpaper because the plywood was builder grade cheapo stuff, the finished with medium sandpaper. Finally, I primed and painted with ooops paint in semigloss from Valspar.

Step 3

Metal Angle

If you are intimidated by metal angle, you can always use 2x2s glued and screwed here. Cut the metal angle with a hack saw and predrill holes (three per slide). Mark locations with a square and screw metal angle to the sides. TIP: Screw at a very slight downward angle to keep the baskets to the back of the box instead of sliding forward.

If you choose to stack, make sure you secure the top laundry basket dress to a stud in the wall.

Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.

Project Type
Dresser Plans
Room
storage and organization
Bathroom
Closets
Style
Cottage Style Furniture Plans

Comments

Mlb71100

Sun, 01/08/2012 - 17:41

I can't wait to make this for my sons' loft. Theirs will be low and approx. 5th long with pull out bins for toys. I bought the supplies today, now I just need time to do it:)

motherof5bears (not verified)

Wed, 11/14/2012 - 07:43

Oh my!My heart just started to race this would be sooo good for toys. They can take the basket where ever they want to play and bring it back to the basement when they are done.

Smartmiltoys

Sun, 11/13/2016 - 04:13

That laundry dresser is super, extra fabulous! You’re right, it is a good idea for toys as well. What talent she has. I’m going to check out her site. I’m not that ambitious, at least not right now, but I would love to have a laundry basket dresser for my laundry and one for toys. Thanks for sharing this.

Jennifer (not verified)

Mon, 11/15/2010 - 22:29

I hate laundry too! and mine is usually clean too and has a hard time making it to the dressers! glad to know I'm not the only one in this boat! I love this idea. thanks

Katy (not verified)

Mon, 11/15/2010 - 22:34

Those are great! I used to have a laundry couch before we moved....All the clean laundry would go onto the couch...It was just easier. This storage could have work for me back then. Now it'll work fo me now. thanks Anna.