Took inspiration from several small builds. Simple 2x4 sides and braces accross the tops and one at the back. 2 pieces of 3/4 ply for the top. A little overkill for the top but I want to make sure it was strong and held everythigng together. Copied Ana's idea of painting wood white but wanted a more natural look for the top so just stained the ply and then poly varnish.
Estimated Cost
$100.
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
American Walnut wood stain and polyurethane varnish for the top. Pure white gloss paint. All joints in the wood are pocket hole as I needed to practice using the jig. I used pieces of ¾ ply cut into 4" strips for the braces, not a good idea 3x1 or 4x1 would have been better.
Job took an afternoon to build but the painting an varnish took a day for each coat so altogether it took a week.
Job took an afternoon to build but the painting an varnish took a day for each coat so altogether it took a week.
Recommended Skill Level
Beginner