Rustic X Coffee Table

Submitted by Anonymous (not verified) on Sat, 01/02/2016 - 13:06

This is my first attempt at a rustic coffee table build based on Ana's designs. I used redwood (mostly) and pine for the bottom shelf. The solution was created using white vinegar and 00 grade steel wool. The solution was not diluted (should have done 50/50 with water) and sat for about 15 days (only needed 5-7 to dissolve all wool).  

Hope you enjoy!

 

Built from Plan(s)
Estimated Cost
$115
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Vinegar/Steel Wool oxidized solution - two coats, not diluted + Satin Clear Minwax Polyurethane finish (three coats, sanded w/220 grit sand paper in between).
Recommended Skill Level
Beginner