Preston Nesting Side Tables

Submitted by beingbrook on Wed, 11/30/2011 - 15:26
| Print this plan

Nesting side tables with cute cottage charm for your living room! DIY plans to build these nesting end tables inspired by Pottery Barn Pratt Nesting Side Tables.

Do you ever get excited when you see a new plan, excited to see photos and read how the project is put together? Yeah? 

Well today, I get to join you!!!  I can't tell you how excited I am to open up this plan and see Brook from Being Brook's Nesting Tables that she built from plans we worked on together.
In between working on the Momplex, being my daughter's primary caretaker, and also trying to develop more video and work on the book, I have not been able to post as many plans as I would like. This makes me so sad, because I love drawing plans, and I love posting plans, and I love being able to give away free plans that anyone can use to save money and improve their lifestyle.
So I'm trying something new!  Hopefully a solution that is positive for everyone involved.  I am working with some of you who are already part of our community to build plans that I draw up before they are blogged.  This way, we'll get a photo visual of the finished project, tips from the builder, and I'll get my plan fix, and the contributor gets a new piece of furniture and our respect and gratitude!
Today, I hope you take a second to stop over and visit Brooke at Being Brook to tell her thank you, to compliment her on her beautiful nesting end tables, and to check out all the amazing projects she's been up to.
But first, check out the plans for this table, followed by some more gorgeous photographs.  Thank you Brook!  You have inspired me so much today!  
Dimensions are shown above


Shopping List


2 - 2x2 @ 8 feet long
1 – 2x4 @ 4 feet long
1 – 1x4 @ 8 feet long
1 – stick 5/8” cove base moulding @ 6 feet long


1 - 2x2 @ 8 feet long
1 – 2x4 @ 8 feet or stud length
1 – 1x4 @ 10 feet long (if you are building small table, you can buy an 8 footer and use scraps from small table)
1 – stick 5/8” cove base moulding @ 6 feet long
1 – 1x2 @ 8 feet long

2” screws
1 ¼” finish nails

Cut List

4 – 2x2 @ 20”
2 – 2x4 @ 12”
2 – 2x4 @ 11”
4 – 1x4 @ 15”
5/8” cove moulding cut to fit4 – 2x2 @ 24 3/4”

2 – 2x4 @ 17”
3 – 2x4 @ 14 1/2”
5 – 1x4 @ 20”
5/8” cove moulding cut to fit
6 – 1x2 @ 7” (Longest point to longest point, both ends cut at 45 degrees off square, ends NOT parallel)
2 – 1x2 @ 14 ½”
1 – 1x2 @ 17”

Tape Measure
Speed Square
Safety Glasses
Hearing Protection
Miter Saw
Brad Nailer
Power Sander
Drill Bit Set
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!


Step 1

Attach legs to aprons to create two leg sets.

Step 2

Then attach the remaining aprons to the leg sets to create a table! How easy is this???

Step 3

Add planking to the top for a rustic look. Go ahead, ding up the top with a hammer - it'll just add to the handmade vintage rustic appeal.

Step 4

This is optional, but I'm so glad Brook put the moulding around her tables. It's just such a nice touch. Glue and nail on. If using a hammer, nail with a nail set to push nails below surface of wood. Corners should be mitered at 45 degrees off square.

Step 5

Step 6

Only difference is we add a center support on this one.

Step 7

Planking for the top ...

Step 8

Moulding if you are going that route.

Step 9

And now the fun part. Add the stretcher and angle braces.

Step 10

And then on the back. And that's it!!!

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.


Kate (not verified)

Thu, 12/01/2011 - 16:20

My mom is getting me a miter saw for my birthday/Christmas. I think this will be a perfect project to try it out! Great way to start before I jump into building a farmhouse bed.

Alaskan Bev

Thu, 12/01/2011 - 20:19

You will love your new miter saw! I have three of them at school and one or two are in use all day, with me no more than 2-3 feet away. Remember all safety rules - good work gloves, hearing and eye protection, and a mask is a good idea, too. Clamp/support your wood. I have students building strong stools, 12 X 12 X 6" wooden boxes with lids, all kinds of smaller boxes, mail holders, tabletop bookracks, assorted toys, shadow boxes, picture frames, "problem solvers" (any kind of wooden creation that meets a need), etc. Have fun with it - good luck!

Jami H

Fri, 12/02/2011 - 10:44

These tables are ADORABLE and simple and I had enough scraps left over from other projects so they were FREE!! They are exactly what I was needing for my living room re-do project.

**Ana, on the cutting instructions; instructions for the larger table legs are missing.**

I used 1x4s instead of 2x4s because that's what I had on hand. They took me two hours.

Also, I pre-cut everything because I wanted to assemble everything at the same time, so I didn't measure as I went along. But my smaller table was too tall to fit under the larger. I had to cut the legs with my circular saw, so I'd go 1/2" shorter on the small table legs (or measure for the smaller table after you've built the taller table).

Also, I fit the planks for both tops last. I did customize it a little, so that made the measurements change a little for the tops.

I'll post pics after they're painted Robin's Egg Blue. :)

GUEST (not verified)

Tue, 12/06/2011 - 07:26

I want to build just the smaller table for my Mom. She has been looking for a table with a unique set of measurements; The top needs to be 16x12. Would these plans work if I change the measurements of the table top?

Kate (not verified)

Sat, 12/10/2011 - 16:27

My husband and I went and got wood for these tables today! I went with cheap furring strips for most of the wood, but splurged on nice 1x4's since I wanted a flatter surface for the top. I can't wait to get started on building tomorrow!

Angel Rose

Tue, 03/13/2012 - 07:37

So... this was the first project I attempted. I adjusted the size to make one of these for my mom who wanted a side table with very weird/specific measurements. It is completed . . . and I learned A LOT as a rookie, but I still have some questions. I had major issues trying to make the aprons straight or flat or whatever the terminology is. I had to restart twice because once I had the two aprons they were so "out of whack" that the other side pieces would not match up to attach. This might have something to do with keeping things "square" . . . which I am still confused about. I don't have the Kreg Jig yet, which I assume makes life 1billion time easier. I just used plain ole drill and screws.

Don't get me wrong, I am SO stoked to have made something! I ran around the house with the hammer screaming at my fiancé, “look, I made a table, a TABLE". Just want to make my next project even MORE successful

Any info would be great! Thanks!


Tue, 03/13/2012 - 10:32

Learning how to make square cuts and mark square are important skills that you'll want to master. If you're using power tools, you'll want to take the time to tune them up, making sure everything is square. If you're using hand tools (my recommendation), you'll want to learn how to make good square cuts. If you're having somebody else do your cutting for you, don't let them do it next time. Learn how to make them yourself.

I wrote a little bit about the topic over at my blog in the article Getting Started in Woodworking. In particular I recommend the book linked in that article. I don't get a cut of those sales, I just thought it was really good.

Angel Rose

Tue, 03/13/2012 - 13:49

I am still not quite sure what I did wrong? I have a miter saw so I thought the cuts were good and square. I guess where I am confused is how to make sure things are square when you screw them in. Again, first project, lot of learning experiences.